Filter
Top Products
128 Using the System Setup Program
0257 2F8h/3F8h Sets the back serial port address to 0x2F8 and internal
serial port address to 0x3F8.
025D Optimizer Mode Selects optimizer mode as the memory operating
mode.
025E Spare Mode Selects spare mode as the memory operating mode.
025F Mirror Mode Selects mirror mode as the memory operating mode.
0260 Advanced ECC
Mode
Selects Advanced ECC (i.e. Lockstep, Chipkill) as the
memory operating mode.
026A Coherent HT
Link Speed
Sets to support HyperTransport 1 specification.
026B Coherent HT
Link Speed
Sets to support HyperTransport 3 specification.
026E Active Processor
Cores
This field controls the number of enabled all of cores
in each processor. By default, the maximum number
of cores per processor will be enabled.
026F Active Processor
Cores
This field controls the number of enabled 6 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
0270 Active Processor
Cores
This field controls the number of enabled 8 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
0271 Active Processor
Cores
This field controls the number of enabled 10 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
0272 Active Processor
Cores
This field controls the number of enabled 12 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
027B HT Assist Disables the Probe Filter chipset option in the System
setup. There are some applications that may lower
chipset performance when this is enabled.
027C HT Assist Enables the Probe Filter chipset option in the System
setup. There are some applications that may lower
chipset performance when this is disabled.
Table 2-1. D4 Token Table
(continued)
Token Setup Option Description