Filter
Top Products
48 About the System
8016h SATA 4 Device
Not Found
Pause SATA 4 device
not found
Check if the SATA port 4 is
enabled. See "SATA
Configuration" on page 95.
Install a SATA device to SATA
port 4.
If the problem persists, see
"Getting Help" on page 289.
8017h SATA 5 Device
Not Found
Pause SATA 5 device
not found
Check if the SATA port 5 is
enabled. See "SATA
Configuration" on page 95.
Install a SATA device to SATA
port 5.
If the problem persists, see
"Getting Help" on page 289.
8018h Sparing Mode is
not be
Configured!!,
Please check
Memory
Configuration!!
Pause Memory
Sparing Mode
Failed
Check if the memory
configuration is set to Sparing
mode. See "Memory
Configuration" on page 92.
If the problem persists, see
"Getting Help" on page 289.
8019h Mirror Mode is
not be
Configured!!,
Please check
Memory
Configuration!!
Pause Memory Mirror
Mode Failed
Check if the memory
configuration is set to Sparing
mode. See "Memory
Configuration" on page 92.
If the problem persists, see
"Getting Help" on page 289.
8020h Supervisor and
User Passwords
have been
cleared
Pause Supervisor and
User Passwords
have been
cleared
Reset password. See the
compute sled’s
documentation for more
information.
If the problem persists, see
"Getting Help" on page 289.
Error
Code
Error Message Response Error Cause Corrective Actions