Filter
Top Products
222 Rack Mount Configuration
Recommended Tools
Before you begin the installation tasks, ensure that you have the following
items:
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• Wrist grounding strap connected to ground
• Antistatic mat or antistatic foam
Installation Tasks
To install the rail and system into the rack, you need to perform the following
tasks.
1
"Installing the Tool-Less Rail Solution in the Rack" on page 223
2
"Removing Sled Modules from the Server Enclosure" on page 228
3
"Installing the Server Enclosure into the Rack" on page 228
4
"Replacing Sled Modules in the Server Enclosure" on page 230
5
"Installing the External PDU into the Rack" on page 231
6
"Connecting the Power Cables" on page 237
7
"Connecting the Server Enclosure to a Rack PDU" on page 239
8
"Connecting the PDU to the Network" on page 243
9
"Powering Up the Systems" on page 246