Filter
Top Products
The following procedure outlines the steps for setting the Service Tag using the CD shipped with a replacement system
board.
Service Tag Utility
NOTE:
If the system has the correct line of business BIOS, you do not need to perform the BIOS flash on the system.
Service Tag Flash Process
1. Before flashing the Service Tag:
Ensure the system is connected to AC power.
Ensure the battery is in the system.
Load the Service Tag flash CD into the CD-ROM.
2. Press <F12> to select the option to boot to the CD.
3. Type 1, and then press <Enter> to upgrade the BIOS to the correct line of business.
4. Type either 1, 2, 3, or 4 and then press <Enter> to select the appropriate system type BIOS.
NOTE:
The BIOS flash runs and restarts the system. Allow this process to complete before moving to the next step.
5. Press <F12> to select the option to boot to the CD.
6.
Type 3 and then press <Enter> to run the Service Tag utility.
Página
130
de
145
Dell
-
Latitude™ D620
-
Printer
-
Friendly Format
22/02/2010
https://dcse.dell.com/SelfStudy/Foundations_2007/Foundations_2007_Portables/Portable
...