Filter
Top Products
Desktop Computer 119
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 19.
NOTE: Since the following steps do not require the complete removal of the optical drive, it is not necessary
to disconnect the cables connecting the optical drive.
2
Remove the optical drive (see "Removing an Optical Drive" on page 115) and carefully set it aside.
NOTICE: Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables
and the cable connectors.
3
Pull up on the drive release latch and slide the floppy drive towards the back of the computer.
Then, lift up to remove the drive from the computer.
4
Disconnect the power and data cables from the back of the floppy drive.
Installing a Floppy Drive
1
If you are installing a new drive:
1 drive release latch 2 floppy drive
1
2