Filter
Top Products
Mini Tower Computer 75
3
Align the shoulder screws on the floppy drive with the shoulder screw slots, and gently slide the drive
into the bay until it clicks into place.
4
Attach the power and floppy-drive data cables to the floppy drive.
5
Connect the flopp- drive data cable to the DSKT connector on the system board (see "System Board
Components" on page 28 for the connector location).
6
Install the drive panel to the front of the computer. The drive panel only fits one way (see "Drive-Panel
Inserts" on page 70).
1 floppy drive 2 shoulder screws (4) 3 shoulder screw slots (2)
1
2
3