Filter
Top Products
Mini Tower Computer 87
5
Set the processor lightly in the socket and ensure that the processor is positioned correctly.
6
While lightly pressing down on the processor, rotate the release lever back toward the system
board until it snaps into place, securing the processor.
7
Clean the thermal grease from the bottom of the heat sink.
NOTICE: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate
thermal bonding, which is a requirement for optimal processor operation.
8
Apply the new thermal grease to the top of the processor.
NOTICE: Ensure that the CPU and audio cables are not routed so that they are pinched when the heat sink
assembly is installed.
9
Install the heat sink assembly:
a
Place the heat sink assembly back onto the heat-sink assembly bracket.
b
Rotate the heat sink assembly down towards the computer base and ensure that the two
captive screws are properly aligned with the holes in the system board.
c
Tighten the two captive screws.
NOTICE: Ensure that the heat sink assembly is correctly seated and secure.