Filter
Top Products
Small Form Factor Computer 217
5
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.
6
Replace the computer cover (see "Replacing the Computer Cover" on page 297).
7
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
8
Enter system setup and select the appropriate
Drive
option (see "Entering System Setup" on
page 257).
9
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 327).
Floppy Drive and Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product
Information Guide
.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the computer cover.
Removing a Floppy Drive or Media Card Reader
1
Follow the procedures in "Before You Begin" on page 19.
2
Lay the computer on its side so that the system board is on the bottom of the inside of the computer.
3
Remove the optical drive and carefully set it aside (see "Optical Drive" on page 215).