Filter
Top Products
280 Chassis Intrusion Switch
Small Form Factor Computer
Replacing the Chassis Intrusion Switch
1
Gently slide the chassis intrusion switch into its slot and reconnect the cable to the system board.
2
Replace the computer cover (see "Replacing the Computer Cover" on page 297).
Resetting the Chassis Intrusion Detector
1
Turn on (or restart) your computer.
2
When the blue DELL™ logo appears, press <F2> immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the
Microsoft
®
Windows
®
desktop. Then shut down your computer and try again.
3
Select the
Chassis Intrusion
option and then press the left- or right-arrow key to select
Reset
. Change
the setting to
On
,
On-Silent
, or
Disabled
.
NOTE: The default setting is On-Silent.