Filter
Top Products
274 Advanced Features
RAID 1 to RAID 1
conversions cannot be performed using the migrating process.
NOTICE: Additional hard drives to be used in the (migrated) array must be no smaller than any of the drives in the
current configuration.
NOTE: Ensure that all drives to be used in the RAID configuration are RAID-enabled (see "Setting Your Computer to
RAID-Enabled Mode" on page 271.)
1
Launch NVIDIA MediaShield.
2
Click to select the array you want to convert.
3
Click
Convert Array
in the
System Tasks
pane.
The
NVIDIA
Convert Array Wizard
appears.
4
Click
Next
.
5
Under
RAID Mode Selection
, select
Mirroring
or
Striping
from the drop-down menu.
6
Click
Next
.
NOTICE: You will lose all data on the selected drives in the next step.
7
Under
Free Disk Selection
, select the hard drive(s) you want to include in the (migrated) array by
clicking the checkbox beside it.
8
Click
Finish
.
The MediaShield RAID management utility window appears and displays the status of the
upgrade/migration process along with any other installed hard drives.
NOTE: The time it takes to convert an array depends on several factors, such as the speed of the processor,
the type and size of the hard drive being used, the operating system, and so on.
Rebuilding a RAID Configuration
If one of the hard drives in a RAID array fails, you can rebuild the array by restoring the data to a
replacement drive.
NOTE: Rebuilding an array can be performed only on RAID 1 configurations.
1
Launch NVIDIA MediaShield.
2
Click to select your RAID configuration (
Mirroring
) in the management utility window.
3
Select
Rebuild Array
in the
System Tasks
pane.
The
NVIDIA
Rebuild Array Wizard
appears.
4
Click
Next
.