Filter
Top Products
Mini Tower Computer 81
6
Connect the drive cable to SATA2 or SATA3 on the system board (see "System Board Components" on
page 28 for mini tower computers).
See the documentation that accompanied the drive and controller card to verify that the configuration
is correct for your computer. Change any settings necessary for correct configuration.
7
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling
vents.
8
Install the drive panel to the front of the computer. The drive panel only fits one way (see "Drive-Panel
Inserts" on page 70).
9
Replace the computer cover (see "Replacing the Computer Cover" on page 297).
10
Update your configuration information in system setup (see "System Setup" on page 257) by setting
the appropriate
Drive
option (
0
or
1
) under
Drives
.
11
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 327).
1 power cable 2 optical drive cable 3 optical drive connector
(SATA)
1
2
3