Filter
Top Products
Desktop Computer 159
14
If you installed a network adapter card and want to turn off the integrated network adapter:
a
Enter system setup, select
Integrated NIC
from the
Onboard Devices
group, and change the
setting to
Off
(see "System Setup" on page 257).
b
Connect the network cable to the network adapter card’s connectors. Do not connect the
network cable to the integrated network connector on the back panel of the computer.
15
Install any drivers required for the card as described in the card documentation.
Removing a PCI Express Card From the Riser-Card Cage
1
Follow the procedures in "Before You Begin" on page 19.
2
Remove the riser-card cage:
a
Check any cables connected to cards through the back-panel openings. Disconnect any cables
that will not reach the riser-card cage once they are removed from the computer.
b
Rotate the riser-card cage handle up and gently pull on the handle and lift the riser-card cage
up and away from the computer.
1 riser-card cage 2 handle
1
2