Filter
Top Products
Replacing the Computer Cover 297
11
Replacing the Computer Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
1
Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2
Ensure that no tools or extra parts are left inside the computer.
3
To replace the cover:
a
Align the bottom of the cover with the hinge tabs located along the bottom edge of the
computer.
b
Using the hinge tabs as leverage, rotate the cover downward until it snaps into place.
c
Ensure that the cover is seated correctly before moving the computer.
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the
computer.
4
Connect your computer and devices to electrical outlets, and turn them on.