Filter
Top Products
78 Mini Tower Computer
5
Connect the media card reader cable to the USB1 connector on the system board (see "System Board
Components" on page 28 for the connector location).
6
Install the drive panel to the front of the computer. The drive panel only fits one way (see "Drive-Panel
Inserts" on page 70).
7
Replace the computer cover (see "Replacing the Computer Cover" on page 297).
8
Enter system setup and use the
Diskette Drive
option to enable your new media card reader (see
"Entering System Setup" on page 257).
9
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 327).
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide
.
1 media card reader 2 shoulder screws (4) 3 shoulder screw slots (2)
4 media card reader cable
1
2
3
4