Filter
Top Products
Mini Tower Computer 89
Power Supply
Replacing the Power Supply
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in
the
Product Information Guide
.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from
your body before you touch any of your computer’s electronic components. You can do so by touching an
unpainted metal surface on the computer chassis.
1
Follow the procedures in "Before You Begin" on page 19.
2
Disconnect the DC power cables from the system board and the drives.
Note the routing of the DC power cables underneath the tabs in the computer chassis as you
remove them from the system board and drives. You must route these cables properly when you
replace them to prevent them from being pinched or crimped.
3
Remove the four screws that attach the power supply to the back of the computer chassis.
4
Press the release button located on the floor of the computer chassis.