Filter
Top Products
Desktop Computer 140
a
Check any cables connected to cards through the back-panel openings. Disconnect any cables
that will not reach the riser-card cage once they are removed from the computer.
b
Rotate the riser-card cage handle up and gently pull on the handle and lift the riser-card cage
up and away from the computer.
4
If you are installing a new card, remove the filler bracket to create an empty card-slot opening.
5
If you are replacing a card that is already installed in the computer, remove the card.
6
If necessary, disconnect any cables connected to the card.
7
Grasp the card by its corners, and ease it out of its connector.
NOTE: See the documentation that came with the card for information on configuring the card, making
internal connections, or customizing it for your computer.
8
Prepare the new card for installation.
CAUTION: Some network adapters automatically start the computer when they are connected to a network.
To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing
any cards.
1 riser-card cage 2 handle
1
2