Filter
Top Products
Desktop Computer 131
8
Replace the optical drive (if your configuration has one). See "Installing an Optical Drive" on page 116.
9
Replace the computer cover (see "Replacing the Computer Cover" on page 317).
10
Turn on the computer.
11
If you have installed a replacement second hard drive, complete step 12 through step 16.
12
Enter system setup, and update the SATA port option under the
Drives
option list (see "Entering System
Setup" on page 257).
13
Exit system setup, and reboot the computer.
14
Partition and logically format your drive.
NOTE: For instructions, see the documentation that came with your operating system.
15
Test the hard drive by running the Dell Diagnostics (see "Dell Diagnostics" on page 327).
16
Install your operating system on the (new) second hard drive.
NOTE: For instructions, see the documentation that came with your operating system.
1 data cable 2 hard drive system board
connector
21