Filter
Top Products
Desktop Computer 164
7
Connect the adapter cable to the PS/2 serial port adapter connector (PS2/SER2) on the system
board (see "System Board Components" on page 102).
NOTE: See the documentation for the PS/2 serial port adapter for information about the cable connections.
8
Replace the computer cover (see "Replacing the Computer Cover" on page 297).
Removing a PS/2 Serial Port Adapter
1
Follow the procedures in "Before You Begin" on page 19.
2
Gently lift the release tab on the card retention latch from the inside to pivot the latch open. Pivot
the latch until it snaps into the open position.
1 release tab 2 adapter retention latch 3 serial-port adapter bracket
4 serial port adapter connector 5 serial port adapter system
board connector (PS2/SER2)
2
4
5
3
1