Filter
Top Products
Analog Port Operation 37
Figure 3-20. Device Modify Dialog Box
3
Choose the number of ports supported by your switch.
4
Click
OK
.
5
Repeat steps 2–4 for each port to which you want to assign a device type.
6
Click
OK
in the
Devices
dialog box to save settings.
NOTE: Changes made in the Device Modify dialog box are not saved until you click OK in the Devices
dialog box.
Changing the Display Behavior
Use the
Menu
dialog box to change the display order of servers and set a screen delay time for
OSCAR.
To access the
Menu
dialog box:
1
Press <Print Screen> to launch OSCAR. The
Main
dialog box appears.
2
Click
Setup - Menu
. The
Menu
dialog box appears.