Filter
Top Products
Analog Port Operation 41
Setting Console Security
OSCAR enables you to set security on your analog port console. You can establish a screen saver
mode that engages after your console remains unused for a specified delay time. Once engaged,
your console will remain locked until you press any key or move the mouse. You will then need to
type in your password to continue.
Use the
Security
dialog box to lock your console with password protection, set or change your
password and enable the screen saver.
To access the
Security
dialog box:
1
Press <Print Screen>. The
Main
dialog box will appear.
2
Click
Setup - Security
. The
Security
dialog box appears.
NOTE: If a password has been previously set, the user will have to enter the password before being able
to access the Security dialog box.
Figure 3-24. Security Dialog Box
To set or change the password:
1
Single-click and press <Enter> or double-click in the
New
text box.
2
Type the new password in the
New
text box and press <Enter>. Passwords require 5 to 12
characters and must include at least one letter and one number. Passwords are also case
sensitive. Legal characters are: A-Z, a-z, 0-9, space, and hyphen. Entering a new password
deactivates the old one.
3
In the
Repeat
box, type the password again and press <Enter>.
4
Click
OK
if you only want to change your password, and then close the dialog box.