Filter
Top Products
60 Terminal Operations
www.dell.com | support.dell.com
To access the
Terminal
menu:
1
Connect a terminal or system running terminal emulation software (such as HyperTerminal)
to the configuration port on the back panel of the 2161DS Console Switch using the supplied
serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow
control. The terminal may be connected at any time, even when the unit is powered.
2
Press any key to access the main menu.
Network Configuration
The 2161DS Console Switch is configured for network access through this option. When it is
selected, you will have access to the addressing that allows the 2161DS Console Switch to be
positioned in your network. For more information, see "Rack Mounting Your 2161DS Console
Switch".
Firmware Management
This menu option contains the
Flash Download
command. The
Flash Download
command allows
you to keep your 2161DS Console Switch firmware current with upgrades available from Dell. For
more information, see "Appendix A: Flash Upgrades".
Enable Debug Messages
This menu option allows you to configure the 2161DS Console Switch to display messages
regarding the status of the 2161DS Console Switch unit. Once you select the level of detail you
wish to receive, the 2161DS Console Switch will begin to display information on your terminal
screen. When you are finished viewing, press any key to exit this mode.
Set/Change Passwords
The 2161DS Console Switch can be set to a secure mode where the
Terminal
menu cannot be
accessed without first entering a password.
To activate security:
1
Select the
Set/Change Password
menu option. You will be prompted to decide if you wish to
continue. Press <y>.
2
Type a password for this 2161DS Console Switch unit and press <Enter>. Passwords require
5 to 12 characters and must include at least one letter and one number. Passwords are also
case sensitive. Entering a new password deactivates the old one.
3
You will be prompted to re-type the password. Once you complete this step, security will be
active and you will not be able to access 2161DS Console Switch terminal operations without
the password.