Filter
Top Products
54 Analog Port Operation
www.dell.com | support.dell.com
Figure 3-35. Scan Dialog Box
3
The dialog box contains a listing of all the servers attached to your unit. Click to enable the
check box next to the servers you wish to scan.
-or-
Double-click on a server's name or port.
-or-
Press <Alt>+ the number of the server you wish to scan. You can select up to 16 servers.
4
In the
Scan Time
box, type the number of seconds (from 3 to 99) of desired time before the
scan moves to the next server in the sequence.
5
Click
OK
.
To remove a server from the
Scan
list:
1
In the
Scan
dialog box, click to disable the check box next to a server to be removed.
-or-
Double-click on a server's name or port.
-or-
Click the
Clear
button to remove all servers from the
Scan
list
2
Click
OK
.
To start the scan mode:
1
Press <Print Screen>. The
Main
dialog box will appear.
2
Click
Commands
. The
Command
dialog box appears.