Filter
Top Products
108 RACADM Subcommand Details
ping6
NOTE: To use this subcommand for CMC you must have Administrator privilege for
CMC and for iDRAC you must have Execute Diagnostic Commands or Configure
iDRAC6 permission.
Synopsis
racadm ping6 <ipv6address>
Examples
racadm iping6 10.9.72.254
IPING6 10.9.72.254 (10.9.72.254): 56 data bytes
64 bytes from 10.9.72.254: icmp_seq=0 ttl=121 time=2.9
ms
--- 10.9.72.254 ping statistics ---
1 packets transmitted, 1 packets received, 0 percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
Subcommand Description
ping6 Verifies that the destination IPv6 address is reachable from iDRAC6
or CMC or with the current routing-table contents. A destination
IPv6 address is required. An ICMP echo packet is sent to the
destination IPv6 address based on the current routing-table contents.