Back to Contents Page
Audio Video Board
Dell™Inspiron™One2305/2310ServiceManual
Removing the Audio Video (AV) Board
Replacing the Audio Video (AV) Board
Removing the Audio Video (AV) Board
1. Follow the instructions in Before You Begin.
2. Remove the back cover (see Removing the Back Cover).
3. Follow the instructions from step 2 to step 5 in Removing the Front Stand.
4. Remove the AV board shield (see Removing the Audio Video (AV) Board Shield).
5. Disconnect the AV board cables from the connectors on the AV board.
6. Remove the five screws that secure the AV board to the chassis.
7. Lift the AV board away from the chassis.
Replacing the Audio Video (AV) Board
1. Follow the instructions in Before You Begin.
2. Align the screw holes on the AV board with the screw holes on the chassis.
3. Replace the five screws that secure the AV board to the chassis.
4. Connect the AV board cables to the connectors on the AV board.
5. Replace the AV board shield (see Replacing the Audio Video (AV) Board Shield).
6. Follow the instructions from step 4 to step 5 in Replacing the Front Stand.
7. Replace the back cover (see Replacing the Back Cover).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
AV board
2
screws (5)