Filter
Top Products
5. Replace the AV board (see Replacing the Audio Video (AV) Board).
6. Connect the AV board cable to the connector on the AV board.
7. Replace the AV board shield (see Replacing the Audio Video (AV) Board Shield).
8. Follow the instructions from step 4 to step 5 in Replacing the Front Stand.
9. Replace the back cover (see Replacing the Back Cover).
10. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.