Filter
Top Products
116 System Setup Program
9
On the
Select Member Hard Drive
screen, double-click the hard drive to select the member drive to
span the array and click
Next
.
10
For RAID 0, on the
Specify Volume Size
screen, select the
Volume Size
you want, and click
Next
.
For RAID 1, skip to step 11.
NOTE: In the following step, you will lose all data contained on the member drive.
11
Click
Finish
to start migrating, or click
Back
to make changes. You can use your computer normally
during the migration process.
Rebuilding a Degraded RAID Level 1 Configuration
If your computer has reported a degraded RAID level 1 volume, contact Dell about replacing your hard
drive. See "Contacting Dell" on page 150.
You can manually rebuild the computer’s redundancy mirror to a new hard drive by performing the
following steps:
1
Click the
Start
button and point to
All Programs
→
Intel Matrix Storage Manager
→
Intel Matrix
Storage Console
to launch the Intel Storage Console.
2
Right-click the available hard drive to which you want to rebuild the RAID level 1 volume, and click
Rebuild to this Disk
.
You can use your computer while the computer is rebuilding the RAID level 1 volume.
book.book Page 116 Tuesday, February 13, 2007 1:50 PM