Filter
Top Products
Installing System Components 59
Figure 3-5. Replacing the Battery
8
Reinstall the riser card. See "Installing the Riser Card" on page 80.
9
Install the cooling shroud. See "Installing the Cooling Shroud" on page 57.
10
Close the system. See "Closing the System" on page 55.
11
Enter the System Setup program to confirm that the battery operates
properly.
12
From the main screen, select
System Time
to enter the correct time and
date.
Also, re-enter any system configuration information that is no longer
displayed on the System Setup screens, and then exit the System Setup
program.
13
To test the newly installed battery, see "Troubleshooting the System
Battery" on page 106.
1 battery 2 battery socket 3 retention tab
1
2
3
book.book Page 59 Thursday, August 30, 2007 3:30 PM