Filter
Top Products
1644 Telnet Server Commands
Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Default Value
This feature is enabled by default.
Example
console#configure
console(config)#ip telnet server disable
console(config)# no ip telnet server disable
ip telnet port
The ip telnet port command is used to configure the Telnet service port
number on the switch.
Syntax
ip telnet port
port number
•
port number
— Telnet service port number (Range: 1–65535)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
2CSPC4.XCT-SWUM2XX1.book Page 1644 Monday, October 3, 2011 11:05 AM