Filter
Top Products
Command Groups 91
Ethernet CFM
storm-control multicast Enables the switch to count Multicast packets
together with Broadcast packets.
IC
storm-control unicast Enables Unicast storm control. IC
switchport protected Sets the port to Protected mode. IC
switchport protected name Configures a name for a protected group. GC
show switchport protected Displays protected group/port information. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
ethernet cfm domain Enters into maintenance domain config mode
for an existing domain. Use the optional level
parameter to create a domain and enter into
maintenance domain config mode.
GC
service Associates a VLAN with a maintenance domain. MDC
ethernet cfm cc level Initiates sending continuity checks (CCMs) at
the specified interval and level on a VLAN
monitored by an existing domain.
GC
ethernet cfm mep level Creates a Maintenance End Point (MEP) on an
interface at the specified level and direction.
IC
ethernet cfm mep enable Enables a MEP at the specified level and
direction.
IC
ethernet cfm mep active Activates a MEP at the specified level and
direction.
IC
ethernet cfm mep archive-
hold-time
Maintains internal information on a missing
MEP.
IC
ethernet cfm mip level Creates a Maintenance Intermediate Point
(MIP) at the specified level.
IC
ping ethernet cfm Generates a
loopback message (LBM) from
the configured MEP.
PE
traceroute ethernet cfm Generates a link trace message (LTM) from the
configured MEP.
PE
Command Description Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 91 Monday, October 3, 2011 11:05 AM