Dell r210 II Server User Manual


 
Dell
32
PowerEdge R210 II Technical Guide
9 BIOS
9.1 Overview
The R210 II BIOS is based on the Insyde
®
BIOS core which supports the following features:
Simultaneous Multi-Threading (SMT) support
PCI 2.3 compliant
Plug and Play 1.0a compliant
MP (Multiprocessor) 1.4 compliant
Ability to boot from hard drive, optical drive, iSCSI drive, USB key, and SD card
ACPI 2.0 support (S0, OS-S4, S5 States)
PXE and WOL support for on-board NICs
SETUP access through <F2> key at end of POST
USB 2.0 (USB boot code is 1.1 compliant)
F1/F2 error logging in CMOS
Virtual KVM, CD, and floppy support
iDRAC supported
Unified Server Configurator (UEFI 2.1) support
Power management support including DBS, Power Inventory and multiple Power Profiles:
o Maximum Performance
o OS Control (DBS)
o Custom
SMBIOS 2.5
PCI-to-PCI bridge 1.0 compliant
Dell Server Assistant 7.0 support
System Service support
Onboard PCI video BIOS support
SATA-enabled for CD-ROM and hard drives
PCI FW 3.0 compliant
Selectable Boot support
El Torito CD-ROM Boot 1.0
Remote BIOS Update support
Remote Configuration Interface (RCI) support
Console redirection through COM1
PXE support based on Preboot Execution Environment Specification v2.1
2-byte ID support
ePPID support in flash
Memory remapping support
DDR3 UDIMM memory support
UEFI shell Support
AC recovery staggering Power-Up
DIMM mismatch checking
VT-d
The PowerEdge R210 II BIOS does not support the following:
BIOS language localization
BIOS recovery after bad flash
RIB Support