Filter
Top Products
Removing The Integrated Storage Controller Card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
2. Open the system.
3. Lift the expansion-card latch out of the slot.
4. Pull and slide the card out from the connector on riser card 3.
5. Disconnect the cables connected to the card:
a) Press down and hold the metal tab on the SAS cable connector.
b) Pull the SAS cable out of the connector.
Figure 38. Removing the SAS Cable Connector
a. SAS cable connector
b. metal tab
c. connector
6. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
73