Filter
Top Products
Troubleshooting Your Projector 137
DoUSB not displaying
•
Windows
Display over USB Should run
automatically. To manually run USB
display, go to My Computer and run
"USB_Display.exe".
•
MAC
a
Go to CDROM: USB_DISPLAY and run
"MAC_USB_Display.pkg".
b
Follow the on-screen instruction to
complete installed.
c
Reboot system, and then re-connect
USB cable to the computer and the
projector.
NOTE: You may require
administrator level access to install
the driver. Contact your network
administrator for support.
IR Pen location offset 1
Ensure the output resolutions of the
projector and computer are 1280x800.
2
Select "second screen only" on the
computer.
Problem (continued) Possible Solution (continued)