Filter
Top Products
Using Your Projector 43
2 Saturation, Sharpness, and Tint only available when the input source
is from Composite.
IMAGE SETTINGS (NO INPUT SOURCE)—Select and press to activate
image settings. The image settings menu provides the following options:
VGA OUTPUT—
Select On or Off the VGA output function at projector
standby status. Default is Off.
DISPLAY SETTINGS (IN PC MODE)—Select and press to activate display
settings. The display settings menu provides the following options:
HORIZONTAL POSITION—
Press to move the image right and to
move the image left.
VERTICAL POSITION—
Press to move the image up and to move
the image down.
FREQUENCY—
Allows you to change the display data clock frequency to
match the frequency of your computer’s graphics card. If you see a
vertical flickering wave, use the Frequency control to minimize the
bars. This is a coarse adjustment.
TRACKING—
Synchronize the phase of the display signal with the
graphic card. If you experience an unstable or flickering image, use
Tracking to correct it. This is a fine adjustment.