Filter
Top Products
Using Your Projector 49
1
Use
and
button to select IP Address, Subnet Mask,
Gateway, DNS, and Store.
2
Press the button to enter IP Address, Subnet Mask,
Gateway or DNS to set the value. (The selected option is
highlighted in blue)
a
Use and button to select the option.
b
Use and button to set the value.
c
After the setup is complete, press the button to exit.
3
After the
IP Address
,
Subnet Mask
,
Gateway
, and
DNS
is set
up, select
Store
and press button to store the settings.
4
If you select
Store
without pressing the
Enter
button, the
system will keep the original settings.
RESET—
Press to reset network configuration.
WIRELESS SETTINGS—
Select and press to activate wireless settings. The
wireless settings menu provides the following options:
DHCP SERVER—
Allows you to enable DHCP server of the wireless.
START IP ADDRESS—
Automatically or manually assigns the Start IP
address of the DHCP server to the projector connected to the wireless.
END IP ADDRESS—
Automatically or manually assigns the End IP address
of the DHCP server to the projector connected to the wireless.
SUBNET MASK—
Configure the Subnet Mask of the wireless connection.
GATEWAY—
Check the Gateway address with your network/system
administrator if you configure it manually.
DNS—
Check the DNS Server IP address with your network/system
administrator if you configure it manually.
STORE—
Press to save the changes made in wireless configuration
settings.
NOTE: