Filter
Top Products
70 Using Cards
Installing an ExpressCard
You can install an ExpressCard in the computer while the computer is
running. The computer automatically detects the card.
ExpressCards are generally marked with a symbol (such as a triangle or an
arrow) or a label to indicate which end to insert into the slot. The cards are
keyed to prevent incorrect insertion. If card orientation is not clear, see the
documentation that came with the card.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
To install an ExpressCard:
1
Hold the card with the top side of the card facing up. The latch may need
to be in the "in" position before you insert the card.
2
Slide the card into the slot until the card is completely seated in its
connector.
If you encounter too much resistance, do not force the card. Check the
card orientation and try again.
1 ExpressCard
1
book.book Page 70 Friday, October 19, 2007 2:03 PM