Filter
Top Products
92 Adding and Replacing Parts
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1
Turn the computer off.
2
Turn the computer over and remove the device security screw.
3
Insert a scribe into the notch and push it to the side to release the drive
from the bay.
4
Slide the drive out of the bay.
Hard Drive
CAUTION: If you remove the hard drive from the computer when the drive is hot,
do not touch the metal housing of the hard drive.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 optical drive 2 device security screw 3 notch
2
1
3
book.book Page 92 Friday, October 19, 2007 2:03 PM