Filter
Top Products
Troubleshooting Tools 119
BAD COMMAND OR FILE NAME — Ensure that you spelled the command
correctly, put spaces in the proper place, and used the correct path name.
BAD ERROR-CORRECTION CODE (ECC) ON DISK READ — See "Drive Problems"
on page 93.
CONTROLLER HAS FAILED — See "Drive Problems" on page 93.
DATA ERROR — See "Drive Problems" on page 93.
DECREASING AVAILABLE MEMORY — See "Lockups and Software Problems" on
page 96.
DISKETTE DRIVE 0 SEEK FAILURE — See "Drive Problems" on page 93.
DISKETTE READ FAILURE — See "Drive Problems" on page 93.
DISKETTE SUBSYSTEM RESET FAILED — Run the Dell Diagnostics. See "Dell
Diagnostics" on page 123.
DISKETTE WRITE PROTECTED — Slide the write-protect notch to the open
position.
DRIVE NOT READY — Put a floppy disk in the drive.
GATE A20 FAILURE — See "Lockups and Software Problems" on page 96.
HARD-DISK CONFIGURATION ERROR —
HARD-DISK CONTROLLER FAILURE —
H
ARD-DISK DRIVE FAILURE —
H
ARD-DISK DRIVE FAILURE —
See "Drive Problems" on page 93.