Filter
Top Products
Adding and Replacing Parts 151
NOTE: To loosen the two captive screws on each side of the heat-sink assembly,
you need a long Phillips screwdriver.
5
Loosen the two captive screws on each side of the heat-sink assembly.
CAUTION: Despite having a plastic shield, the heat-sink assembly may be very
hot during normal operation. Ensure that it has had sufficient time to cool before
you touch it.
6
Rotate the heat-sink assembly upward, and remove it from the computer.
1 memory shroud 2 thumbscrews (2)
3 memory fan (only present on
computers without memory riser
cards)
1
2
3