Filter
Top Products
System Setup 77
Diskette
Drive
(Internal
default)
Enables and disables the floppy drives and sets read
permission for the internal floppy drive. Off disables all
floppy drives. USB disables the internal diskette drive and
enables a USB floppy drive, if the USB controller is enabled
and a USB drive is connected. Internal enables the internal
floppy drive. Read Only enables the internal drive controller
and allows the internal floppy drive read-only permission.
NOTE: Operating systems with USB support will recognize USB
floppy drives regardless of this setting.
SATA 0
through 2
(On default)
Enables (On) or disables (Off) a SATA drive.
Displays the Controller type (SATA), Port number the drive
is using, Drive ID number, and Capacity.
SATA
Operation
(AHCI
default)
Determines the integrated SATA controller's operating mode,
which can be either AHCI or ATA.
SMART
Reporting
(Off
default)
Controls whether errors for integrated drives are reported
during startup.
Onboard Devices
Integrated
NIC
(On default)
Enables or disables the integrated NIC controller.
Settings are
On, Off, On w/RPL, or On w/ PXE. When the On w/ PXE or
the On w/RPL setting is active, if a boot routine is not available
from the network server, the computer attempts to boot from the
next device in the boot sequence list.
Integrated
Audio
(On default)
Enables (
On) or disables (Off) the onboard
audio controller. You can also select Auto
to use the add-in Audio controller.
1394
Controller
Enables (On) or disables (Off) a 1394 controller.