Filter
Top Products
Adding and Replacing Parts 253
7
Press down the release lever on the side of the drive carrier and pull the
drive out.
8
If you are not installing another drive in the drive bay:
a
Reinstall the empty drive carrier by sliding it back into the drive bay
until it clicks into place.
If you later decide to install another floppy drive or a Media Card
Reader in that drive bay, you can slide it into the drive carrier without
removing the carrier from the drive bay.
b
Install a drive panel insert (see "Replacing a Drive-Panel Insert" on
page 249).
1 floppy drive 2 floppy drive carrier
2
1