Filter
Top Products
Ethernet Communication Module IFD9507
DVP-PLC Application Manual
27
Test@delta.com.tw
, and the SMTP server is 192.168.0.1. The E-Mail will be sent to the SMTP server
first, and the server will further send it to the recipient Test@delta.com.tw
.
3. E-Mail of sender:
Maximum 63 Engligh characters are allowed.
4. Subject of E-Mail:
You can enter the text message in the column, and the message will be placed in the subject of the
E-Mail and sent to the recipient. IFD9507 is able to contain 1 ~ 3 E-Mail subjects (max. 63 English
characters are allowed).
5. E-Mail of recipient:
One mail can be sent to 10 addresses according to the alarm settings. Every address allows max.63
English characters. For example, (see the figure above) when Alarm 1 is triggered, the E-Mail will be
sent to Test1@delta.com.tw
and Test2@delta.com.tw . When Alarm 2 is triggered, the E-Mail will be
sent to Test2@delta.com.tw
Note:
To correctly send out E-Mails, there has to be a SMTP server in the network. When we send out an
E-Mail, the mail will be sent to SMTP server first, and the server will further send the mail to the
designated address.
10.5 Monitoring Settings
You can read data in designated addresses in different equipment in the network by setting up IFD9507.The
data can be temporarily stored in IFD9507 for fast storing and acquisition.
Setting up monitoring functions
1. Monitor bit:
Device addresses for setting up the bit status of serial slave; able to read the content in the