Filter
Top Products
Ethernet Communication Module IFD9507
DVP-PLC Application Manual
45
1. Serial slave mode: (used when in Modbus TCP protocol)
The instruction sent from the master is received and transferred to the network. Please designate the
station address and relay IP address.
Station address: slave PLC address (Gateway and PLC address cannot be the same)
Relay IP address: serial master IP
11.8 Ethernet/IP
You can read data in designated addresses in different equipment in the network by setting up IFD9507.The
data can be temporarily stored in IFD9507 for fast storing and acquisition.
Setting up Slave Mode connection parameters