Denso BHT-100B Scanner User Manual


 
138
Problem
Uploading has failed.
Solution
To retry uploading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Chapter 2,
Subsection 2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
Problem
Uploading the BHT system parameter file has
failed.
Solution
To retry uploading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Chapter 2,
Subsection 2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
Problem
The memory has already contained 80 files, so the
BHT system parameter file or system message file
cannot be set up.
Solution
Press the C key to return to the SYSTEM MENU
and delete unnecessary files. (Refer to Chapter 2,
Subsection 2.5.3, [ 7 ].)