Filter
Top Products
64
Selecting the "5: COM" on the SET SYSTEM menu
calls up the screen shown at left.
1 OPTICAL: Switches to the communi-
cations parameters setting
screen
for the optical inter-
face
.
2 CONNECTOR: Switches to the communi-
cations parameters setting
screen
for the direct-con-
nect interface.
3 COM PORT: Switches to the interface
port setting screen.
4 PROTOCOL TYPE: Switches to the communi-
cations protocol type set-
ting screen.
Select a desired screen by using the numerical
keys or M1 and M2 keys, and then press the ENT
key.
To return to the SET SYSTEM menu, press the C
key.
[4.5-1] Setting the communications parameters for the optical interface
Selecting "1:OPTICAL" on the SET COM menu calls
up the screen shown at left.
1 PARAMETER: Switches to the commu-
nications parameters set-
ting screen.
2 PROTOCOL: Switches to the commu-
nications protocol option
screen.
Select a desired screen by using the numerical
keys or M1 and M2 keys, and then press the ENT
key.
To return to the SET COM menu, press the C key.