Filter
Top Products
46
Network Configuration
Corinex AV200 Powerline Ethernet Wall Mount
When to use this filter:
• When you want to isolate a Powerline test network from the rest of the
electrical grid, either because you don’t want the Powerline signal from the
test network to go out and disrupt other adapters, or because you want to
isolate this network from the noise, or other traffic, in the rest of the electrical
grid. This setup is illustrated in the picture below.
Powerline Domain
Corinex AV200 Powerline Wall Mount
Power Strip
PrefilterNo Powerline signal on this side
No Noise on this side
Corinex AV200 Powerline Wall Mount
AV2
00
Powerline
Wal
l Mount
AP
VPI
Power
SYNC/RST
STANDBY
AV2
00
Powerline
Wal
l Mount
AP
VPI
Power
SYNC/RST
STANDBY
• When you want to isolate the electrical noise produced by some household
appliance, because this noise falls in the PLC band and disrupts the signal from
the adapters. This setup is illustrated in the picture below.
Powerline Communication
Noisy Appliance
Corinex AV200 Powerline Wall Mount Corinex AV200 Powerline Wall Mount
AV2
00
Powerline
Wall Mount
AP
VPI
Power
SYNC/RST
STANDB
Y
AV2
00
Powerlin
e
Wal
l Mount
AP
VPI
Power
SYNC/RST
ST
ANDB
Y