Filter
Top Products
47
Troubleshooting Guide
Corinex AV200 Powerline Ethernet Wall Mount
6 Troubleshooting Guide
The Corinex AV200 Powerline Ethernet Wall Mount has been designed to be a reliable
and easy-to-use network connection device. Please refer to the list below to aid in
troubleshooting or visit
www.corinex.com/retail and go to the appropriate section
for information on your product. There you will find news, manuals and software
updates, as well as frequently asked questions (FAQ).
The POWER LED is off.
1. Make sure the Wall Mount adapter is properly plugged directly into the electrical
outlet, and that the outlet has power.
2. Try another outlet.
The VPI LED is off.
1. Make sure the wall mount adapter is plugged directly into the outlet, rather
than into a surge suppressor or power strip. The current model of the Corinex
AV200 Powerline Ethernet Wall Mount is not designed to function
through a surge suppressor.
The AP LED is off.
1. Make sure the wall mount adapter is configured as fixed AP. For this reason
network identifier has to be defined.
Weak network connection
1. If any power-draining devices are being used, such as hair dryers, try plugging
them into a Powerline Noise Filter (sold separately).
2. Your network may be spread across different circuits. Try plugging in a
Corinex PowerPhase Coupler to bridge the Powerline signal across the
phases in your home or office (sold separately, US only).
3. Try another outlet.
To avoid personal injury and damage to the system:
1. The principal method to disconnect the device completely from the electrical
power network (mains) is to unplug the power cord from the mains socket.
2. Never install the unit in wet areas or next to radiators/heaters.
3. Never use the unit outside.
4. Unplug the unit during severe storms.
5. Never open the equipment enclosure.
To verify that your equipment is connected and working correctly, use the standard
Ping utility. In Windows, click on menu Start -> Run, then type the command
ping IPADDRESS -t, where IPADDRESS is the IP address of the computer to