Single port KVM over IP switch
Figure 5-20. Drive Redirection dialog
Drive to redirect
Select the local drive you want to share with the remote computer, which could be Floppy
disc, CD-ROMs, USB-Sticks and hard drives.
Port: This is a fixed number “443”.
Warning
Please be cautious that if “Allow Write Support” is selected, all data on the shred media
mi
ht be destro
ed.
Device Authentication
The factory default Username is “super” and the default Password is “pass”.
5.5.3.3 Click Ok, the new device icon will be changed as below,
Figure 5-21. Drive Redirection finished
Warning
1. Drive Redirection is only possible with Windows 2000 and the latter version.
2. The Drive Redirection works on a low SCSI level and the SCSI protocol cannot recognize
partitions; therefore the whole drive selected will be shared instead of any particula
partition.
3. While connecting to a legacy KVM switch, please select PS/2 mouse fo
Keyboard/Mouse setting from webpage. Otherwise you will be not be able to use
Hot-key.
