Filter
Top Products
Single port KVM over IP switch
Subnet Mask
The net mask of the local network.
Gateway IP address
In case the IP-KVM switch should be accessible from networks other than the local one,
this IP address must be set to the local network router's IP address.
Primary DNS Server IP Address
IP address of the primary Domain Name Server in dot notation. This option may be left
empty, however the IP-KVM switch will not be able to perform name resolution.
Secondary DNS Server IP Address
IP address of the secondary Domain Name Server in dot notation. It will be used in case
the Primary DNS Server cannot be contacted.
Remote Console And HTTPS port
Port number at which the IP-KVM switch's Remote Console server and HTTPS server
are listening. If left empty the default value will be used.
HTTP port
Port number at which the IP-KVM switch's HTTP server is listening. If left empty the
default value will be used.
Telnet port
Port number at which the IP-KVM switch's Telnet server is listening. If left empty the
default value will be used.
Bandwidth limitation
The maximum network traffic generated through the IP-KVM switch ethernet device.
Value in Kbit/s.
Disable Enterprise Mangement
With this option you may exclude the IP-KVM switch from management by your supplier.
Disable Setup Protocol
Enable this option to exclude the IP-KVM switch from the setup protocol.