Filter
Top Products
NANO-PV-D510A User Manual
Page 125
Step 6: After completing the system configuration, press any key in the following window
to reboot the system.
Figure B-6: Press any key to continue
Step 7: Eject the recovery CD. Step 0:
B.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Step 1: Turn on the system. When the following screen displays (
Figure B-7), press the
<F3> key to access the recovery tool. The message will display for 10 seconds,
please press F3 before the system boots into the operating system.
Figure B-7: Press F3 to Boot into Recovery Mode
Step 2: The recovery tool menu appears. Type <4> and press <Enter>. (
Figure B-8)