Filter
Top Products
NANO-PV-D510A User Manual
Page 52
Step 5: Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit
connector. Pin 1 on the audio cable connector is indicated with a white dot. See
Figure 4-13.
Figure 4-13: Audio Cable Connection
Connect the audio devices. Connect speakers to the line-out audio jack. Connect the
output of an audio device to the line-in audio jack. Connect a microphone to the mic-in
audio jack.
4.6.3 Keyboard/Mouse Connector
The NANO-PV-D510A is shipped with a keyboard/mouse Y-cable connector. The
keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
NANO-PV-D510A and branches into two cables that are each connected to a PS/2
connector, one for a mouse and one for a keyboard. To connect the keyboard/mouse
Y-cable connector, please follow the steps below.